< Back

Kvaser USBcan Pro 2xHS v2

00752-9

The USBcan Pro 2xHS v2 is a USB to dual-channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.

Major features: - USB CAN interface with Kvaser t programmability. - Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation). - High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s. - Supports both 11-bit (CAN2.0A) and 29- bit (CAN 2.0B active) identifiers. - Power is taken from the USB bus. - Galvanic isolation. - Quick and easy plug-and-play installation. - Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet. - Kvaser MagiSync provides automatic time synchronization between several PC-to- bus interfaces connected to the same PC. - Programming functionality to support interface mode e.g. optimize protocol handling, pre-filter CAN messages directly on the interface or simulate missing hardware. - Simultaneous operation of multiple devices. - Support for SocketCAN, see elinux.org for details.